DE-ICING / ANTI-ICING VEHICLES

DIV SYSTEM

 

Back to home page

Back to modules page

 

SPRAY-GUN

GENERAL  MAIN COMPONENTS    SPECIFICATIONS

VS 10

VS 10 is a handheld spray-gun with pistol type handle. When the trigger position is changed the flow and spreading of the spray is also changed. When not used the spray gun is placed in a keeper in the back of the basket.

VS 15

VS 15 is the same as VS 10 but includes a hose and a self-retracting hose reel. This equippment is used at ground level and placed on the base unit. It can be mounted on one or both sides of the vehicle.

VS 20

VS 20 is a boom mounted spray nozzle. A short movable boom is placed in front of the basket and on its outer end is placed a turnable nozzle. The nozzle is controlled by a joy-stick placed in the basket. With this option the nozzle will be closer to the surface during spraying and the operator will be well protected in a closed cab.

 

MAIN COMPONENTS

                                                sprutor.gif (3398 bytes)

                                                          1.  spray-gun type 2(4)
                                                          2.  shut of valve for heating the
                                                               type 1/water gun
                                                          3.  spray-gun type 1/water
                                                                                    
                                                                               
                                                              

SPECIFICATIONS

FLUID PRESSURE (MPa) type 1/water   1,6
type 2(4)       
1,0
FLOW (l/min) variable type 1/water   0-200
type 2(4)       
0-75
REEL, hose length (m) 15

                          [Home][Philosophy][General][DIV family][Modules]